
76
.
.
6-17
Motion Detection:
The purple area is the selected
motion detection area. User can move the cursor to
choose the area and can also set the sensitivity of the
area as needed. Click
Full screen
or press right
key on the area to display the motion detection area
at full screen. After setup the user can
Save channel
or
Clear
the area.
Please make sure your motion
detection time period and recording period do not
conflict i.e cover same time period. You can select
purple area as motion detection area. Set
Channel
,
Delay time
(this is the record time after the motion
completes - suggest 60 secs) and
Sensitivity
(suggest
level 4). Click
full screen
or right mouse button, to
make motion detection area full screen. In multi-video
mode, recording will be shown on the window you
have set motion detection. Please turn off schedule
recording for any channels that are totally motion
detect.
Alarm output
: Set alarm output when motion
detected.
Recorded Video
: Tick to set channels for
recording when motion detected.
Save:
Save channel settings.
Clear:
Clear set area.
Please click
SAVE
again when setup complete.
Video Parameter:
Set video/audio parameters:
Channel
Save
(channel save)
Reset
(click reset to default)
Audio enable
(Off / On)
Image:
Hue
: (adjust slider)
Contrast
(adjust slider)
Brightness
(adjust slider)
Saturation
(adjust slider)
.
Press
SAVE
at bottom of menu
when all channel settings are
complete.