DVR365 DSD204 Operation Manual Download Page 45 | Manualshive

Page: 45 / 87

DVR365 DSD204 Operation Manual Download Page 45

45

Additional Menus available using software

.

This DVR can be controlled via a number of methods.

1.

Direct control through the DVR using buttons, mouse or hand remote.

2.

Networked connection either direct from PC to DVR, via a local area
connection or via Internet connection.

The network methods can be controlled via the Web browser or by using
Client software. The SightBoss Client Software is supplied with this DVR.
The previous Client software prior to SightBoss can still be used but this will
be withdrawn by the manufacturer in due course. This can be downloaded
from the website. The SightBoss Client software supplied with this DVR
allows you to manage a number of DVRs remotely.

The menu options covered in this manual therefore refer only to direct access through
the DVR, networking setup and access via the Web browser. All options covered by
the SightBoss Client software are covered in the SightBoss Manual.

«
...
43
44
45
46
47
...
»

Summary of Contents for DSD204
























































































Reviews:

No comments