
35
4.1.3 Power off
You must cut off power before changing HDD.
To power the unit down correctly, hold the POWER button on front of unit in for
three seconds and then switch off rear power switch.
4.1.4 Power off recovery
If power is cut off in record/schedule/alarm mode
,
system will save records and
continue in previous mode when power supply recovers.
4.1.5 Change DVR battery
We recommend you change the CMOS internal battery annually with the same type
battery
.
Note: Please set system time and record mode again if DVR is not in record mode
when you change battery.
4.2 recording
Select your record mode. There is a record symbol when recording.
4.2.1 Manual record setup
·
press “rec” on remote control or “O” button on front panel(available for
authorised users only), or in
advanced
>
record control
·
look up channel record mode, recording channels are marked with“O”.
Steps
Instruction
Display
1.
or number
keys
Shift record
on/off,
recording
channels are
marked ‘
O’
2.
Select channel
Menu
instruction
3. save
Press ok to
Save setting
Start channel recording
:
non-recording channel is marked with press number
key (or use arrow key, jog shuttle, mouse
)
to mark it with select ONE DAY
or PERMANENT in start time, press ok to save the setting.
Stop channel recording:
Mark the channel with ‘
‘
to stop recording. Select ONE
DAY or TRIGGER in stop time. Press OK to save the setting, press ESC to cancel.
Set all channels:
Mark all channels option with ‘
‘