27
6. The DVD Writer needs to be set as ‘
MASTER’
using the
jumper settings on the back of the DVD Unit. As you look at
the rear of the unit this is the Right Hand Most Jumper.
7. Using the screws from the cable bag attach the DVD
Writer to the DVD plate as shown. Note this position may
need to be adjusted to seat the DVD Writer correctly.
8. Remove the blanking plate from the DVR by gently
prising the securing tabs inwards.
9. Returning the DVD Writer to the DVR hold
the unit whilst re-screwing in place.
10. Attach (in this case) a ribbon cable to the
third IDE socket as shown in the picture.