manualshive.com logo in svg

DVR365 DSD204, Operation Manual, Page: 69 / 87

Share
Download
DVR365 DSD204 Operation Manual Download Page 69

69

Real time monitor:

  You can select the channel you want to see from the displayed

channels. If you want to change channel name, please set in

Assistant->Channel

Name.

Click the right button in monitor mode and you will find 2 more options in the menu:

Prearrange set

and

Pantilt Control

.

Note

:You must have the control power to set these 2 menu options. If these 2 menu

options are greyed out and you have connected PTZs to your DVR you must first set
the PTZ menu detailing channel, protocol, camera ID and baud rate. Note that only
PTZs detailed in the protocol list can be controlled by this DVR.

Right button menu in monitor mode:

Multi-Video Preview

:

8 modes provided: 1 video;   4 video mode;  1,4 videos mode;   2,4 video mode;   3,4
videos mode;   4,9 video mode;    1,9 video mode;   2,16 video mode.

Decode quality:

4 levels.

Playback Control Bar

:  See record playback for more details

Pan-tilt Control:

    Control PTZ  -  move zoom, focal length and iris range, see

below.

Note:  Please make sure that you have setup the  PTZ menu first.

6-7

Summary of Contents for DSD204
























































































Reviews:

No comments