34
Chapter 4 System operation
*Please make sure all HDD and wires are well connected before power on
4.1. Power on/off
4.1.1 Power on
Plug in power cable; switch on the power button on the back of your DVR; then
power indicator lights and DVR boots up. The unit will come up in the default video
multi-window mode. Schedule record will start if your DVR power on time is in the
schedule period time.
4.1.2 Enter system menu
Press Enter (left mouse key) to pop-up login box, enter user name and password.
The following default users and passwords are available:
User Name : 888888 Password 888888 (full user rights)
User Name : 666666 Password 666666 (restricted user rights)
User Name : admin Password admin (full user rights – for networking)
Click on numeric key button to display full numeric table and click on digits.
If a user name is required then create user name and password using ACCOUNT
menu. After clicking on numeric key button shown above, there are two further
options for alpha in lower or upper case.
In the event that an incorrect user name or password is entered more than 5 times, the
account will be locked. This will automatically clear after 30 minutes or the unit can
be rebooted for an immediate reset.
It is advisable to change the default passwords for security reasons but please ensure
that the new passwords are retained in a safe place for later referral. If passwords are
lost then the manufacturer will have to be contacted for a super password that lasts for
only one hour.