Durr Dental Tornado 1, Installation And Operating Instructions Manual

Page: 3 / 48

Contents
Important information
1 About this document . . . . . . . . . . . . . . 3
1.1 Warnings and symbols . . . . . . . . 3
1.2 Copyright information . . . . . . . . . 4
2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Intended purpose . . . . . . . . . . . . 4
2.2 Intended use . . . . . . . . . . . . . . . . 4
2.3 Improper use . . . . . . . . . . . . . . . . 4
2.4 General safety information . . . . . . 5
2.5 Specialist personnel . . . . . . . . . . 5
2.6 Electrical safety . . . . . . . . . . . . . . 5
2.7 Notification requirement of seri-
ous incidents . . . . . . . . . . . . . . . .
5
2.8 Only use original parts . . . . . . . . . 5
2.9 Transport . . . . . . . . . . . . . . . . . . . 5
2.10 Disposal . . . . . . . . . . . . . . . . . . . 6
Product description
3 Overview . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1 Scope of delivery . . . . . . . . . . . . . 7
3.2 Optional items . . . . . . . . . . . . . . . 7
3.3 Wear parts and replacement
parts . . . . . . . . . . . . . . . . . . . . . .
7
4 Technical data . . . . . . . . . . . . . . . . . . . . 8
4.1 Tornado 1 . . . . . . . . . . . . . . . . . . 8
4.2 Tornado 1 . . . . . . . . . . . . . . . . . . 10
4.3 Tornado 1 with membrane dry-
ing unit . . . . . . . . . . . . . . . . . . . .
12
4.4 Tornado 1 with membrane dry-
ing unit . . . . . . . . . . . . . . . . . . . .
14
4.5 Tornado 2 . . . . . . . . . . . . . . . . . . 16
4.6 Tornado 2 with membrane dry-
ing unit . . . . . . . . . . . . . . . . . . . .
18
4.7 Distance between rubber feet . . . 20
4.8 Type plate . . . . . . . . . . . . . . . . . . 20
4.9 Evaluation of conformity . . . . . . . 21
5 Operation . . . . . . . . . . . . . . . . . . . . . . . 22
5.1 Unit without membrane-drying
unit . . . . . . . . . . . . . . . . . . . . . . .
22
5.2 Unit with membrane-drying unit . . 22
Assembly
6 Requirements . . . . . . . . . . . . . . . . . . . . 23
6.1 Installation/setup room . . . . . . . . 23
6.2 Setup . . . . . . . . . . . . . . . . . . . . . 23
6.3 Information about electrical con-
nections . . . . . . . . . . . . . . . . . . .
23
7 Transport . . . . . . . . . . . . . . . . . . . . . . . . 24
8 Installation . . . . . . . . . . . . . . . . . . . . . . . 24
8.1 Remove the transport locks . . . . 24
8.2 Establishing the compressed air
connection . . . . . . . . . . . . . . . . .
24
8.3 Place a collector tray underneath . . 25
8.4 Electrical connections . . . . . . . . . 25
9 Commissioning . . . . . . . . . . . . . . . . . . . 26
9.1 Check the motor protection
switch . . . . . . . . . . . . . . . . . . . . .
26
9.2 Checking the switch-on/cut-off
pressure . . . . . . . . . . . . . . . . . . .
27
9.3 Checking the safety valve . . . . . . 27
9.4 Draining the condensation water . . 27
10 Adjustment options . . . . . . . . . . . . . . . 28
10.1 Adjusting the pressure switch . . . 28
10.2 Adjusting the motor protection
switch . . . . . . . . . . . . . . . . . . . . .
29
11 Circuit diagrams . . . . . . . . . . . . . . . . . . 31
11.1 230 V units . . . . . . . . . . . . . . . . . 31
11.2 Devices with 110 - 127 V . . . . . . 33
Usage
12 Operation . . . . . . . . . . . . . . . . . . . . . . . 35
12.1 Switching the unit on/off . . . . . . . 35
13 Maintenance . . . . . . . . . . . . . . . . . . . . . 36
13.1 Maintenance schedule . . . . . . . . . 36
13.2 Replacing the air intake filter . . . . 38
Contents
9000-610-60/02 1909V007 1
EN