Duplo DPB-500, Instruction Manual, Page: 64 / 148

3-6
CHAPTER 3 STARTING BINDING OPERATION
2. Test-Feeding a Cover
Paper feed tray
Cover
Back stopper
1.
Load covers on the paper feed tray
and press the back stopper against
the covers.
Cover feeder
skewing adjustment
Axis
Feed guide Feed guide
Cover
2.
Loosen the cover feeder skewing
adjustments and turn the axes until
the feed guides align with the covers.
Do not press the feed guides hard
against the covers. This may cause mis-
feed.
Red beam
Cover
Red beam
Cover
Spine width
Guide adjustment
switch A
Guide adjustment
switch B
Scoring line
3.
(For a side base) Move the covers
until the spine base line aligns
with the red beam, using the guide
adjustment switches A or B.
Moving the guide adjustment switch A to the
left will move the paper feed guides closer
to each other. Moving the guide adjustment
switch A to the right will move the paper
feed guides farther from each other.
Moving the guide adjustment switch B to
the left will move the paper feed guides
to the operator's side. Moving the guide
adjustment switch B to the right will move
the paper feed guides to the non-operator's
side.
The increment of the guide adjustment
switches A and B varies depending on how
long you keep pressing the switch.
Press the switch:
0.1 mm (0.004 inch)
Keep pressing the switch:
1.0 mm (0.04 inch)
When you continue to press the switch, the
paper feed guides will keep moving by 1.0
mm (0.04 inch).