Duplo DPB-500, Instruction Manual, Page: 18 / 148

1-4
CHAPTER 1 BEFORE OPERATION
3. Names and Functions
3-1. External Parts
T ouch Panel Angle Adjustment Knob
Adjusts the angle of the touch panel.
Main Cover
Prevents the user from
touching inside of the
machine during operation.
Fume Exhaust Opening
Exhausts steam from inside the
machine.
Safety Sensor
The machine stops if the light
between the sensors is
interrupted.
Touch Panel
Use this panel to enter information
to operate the machine.
Clamp
Holds a book block and moves horizontally
during the binding operation.
Support clamp
When placing a book block on the clamp, the
support clamp is used as an aid in holding its
shape.
Emergency Stop Button
Press this button to stop the
machine urgently.
Start Button
Starts the binding operation.
Glue Drain Access
Open this cover to place a
container before draining the glue
in the glue tank.
Nipper Level Adjustment Access
Open this access to access to the
adjustment lever to raise or lower
the nipping station.
Spine Meter Roller Adjustment
Adjusts the amount of spine glue
applied to the booklet.
No.2 Glue Drum Meter Adjustment
Adjusts the amount of glue provided
to the No. 2 drum.
No.1 Glue Drum Meter Adjustment
Adjusts the amount of glue provided
to the No. 1 drum.
Main Switch
Turns on or off the
machine.
Jam Removing Knob
When a paper jam occurs
during the transportation of
a cover, rotate this knob to
move the feed roller and
remove the jammed cover.