DTM System cloud FLEX, Installation And Service Manual

Page: 7 / 40

7
All works associated with connecting, installing and removing additional modules should be performed with
disconnected power supply of the FLEX868 receiver.
Fig. 3 Exemplary view of the display after the usage of button number 2 in the remote number 0006.
4. Simple assigning /removing of the remote
Proste dopisywanie pilota do pamięci odbiornika jest alternatywą do zaawansowanego programowania poprzez
menu odbiornika, w sytuacji prostych i małych instalacji.
W przypadku wykorzystania jednej z metod prostego dopisywania pilota, odbiornik umieści go w swojej pamięci
na pierwszej wolnej pozycji.
4.1. Fast assigning of the remote button to the channel of the receiver
To make work with the FLEX868 receiver easier fast assigning of the remote button to the channel of the receiver
was introduced. With the use of C1/C2 button it is possible to assign the remote to the C1/C2 channel. This activity requires
pressing and holding the button of C1/C2 channel for more than 5 sec (accordingly ‘c1’ and ‘c2’ are shown on the display)
and pressing chosen button of the remote at this time (Fig.4).
The individual blockade of simple/remote assigning of the remote is switched off after the assigning.
Fig. 4 The example of assigning button number 1 to the channel C1 of the receiver with the help of C1 buttons.
In the receiver equipped in optional REL-2/REL-2-PWR module assigning/removing the remote to the channels
C3/C4 is made similarly as for the channels C1/C2.
4.2. Fast removing of the connection between the remote button and the channel of the receiver
To remove the connection between the remote button and C1 channel it is necessary to:
 press and hold C1 button for more than 5 sec;
 'c1’ is shown on the display;
 press the removed remote button;
 the connection between the remote and the channel is deleted.
Removing the remote button from the other channel of the receiver is made similarly as for the channel C1.
In the case of removing all connections of remote buttons and the channels of the receiver the remote is in the
memory of the receiver on the set position all the time. To remove the remote from the receiver memory it is
necessary to use UP function from the submenu of PP function (see pt.5.1.7).
4.3. Remote assigning of the remote in the radio range of the receiver
This function allows to assign new remotes without the necessity of physical access to the receiver button. The
condition of success is to be in the radio range of the
receiver and to have remote assigned earlier. To assign
the remote to the receiver memory it is necessary to:

press and hold for about 15sec any button of
the remote assigned earlier;
 in time no longer that 3 sec from releasing the
remote button press and hold for about 15 sec
any button on the remote which is to be
assigned.
Fig. 5 Remote assigning of the remote in the radio range of the receiver.