DTM System cloud FLEX, Installation And Service Manual

Page: 12 / 40

12
5.1.4. CP option – copying of the remote settings from the other remote programmed earlier
Using the option of copying the settings from the other remote programmed earlier (Fig.11) significantly
quickens the edition when more than one remote is supposed to have settings different from the factory settings. To copy
the settings it is necessary to:
 when the display shows CP press OK/ESC button of the receiver;

with the NEXT button set the number of the remote from which the settings are to be copied (short pressing
enlarges the value, holding the button moves to the next position);

press OK/ESC button – the remote edited gets the configuration of the buttons as the remote from set position;
Pressing and holding OK/ESC button of the receiver it is possible to return to the menu of the receiver.
Fig. 11 Copying the settings of the remote with the function CP in submenu PP of the receiver.