DTM System cloud FLEX, Installation And Service Manual

Page: 10 / 40

10
5.1. PP option – remote programming /edition
5.1.1. New remote programming
To add the remote to the receiver it is necessary to (Fig.9):

while the display shows 'PP' press OK/ESC button of the receiver; the display shows 'PP-3';
 press the button of the remote which is to be assigned three times until 'PP-0' is shown on the display;

press OK/ESC button to confirm; reference number of the remote is shown;
 press OK/ESC button again to confirm;

At this time the remote assigned has factory settings:
 button number 1 is assigned to the channel number 1;

button number 2 is assigned to the channel number 2;
 button number 3 is assigned to the channel number 3 (needs REL-2/REL-2-PWR module installed);
 button number 4 is assigned to the channel number 4 (needs REL-2/REL-2-PWR module installed);
 individual blockade of remote assigning of the remote is switched off.
In the case of programming the remote with more buttons/channels it is necessary to pay attention to different
numbering of the buttons/channels of the remote assigned to the channels of the receiver.
After assigning the new remote we are in PP sub option which allows to::

CP – copying of the remote settings to the other remote in the memory of the receiver. Its number should be
given during the process;
 Pn – association of the channels with the remote buttons;
 bc - blockade/admin blockade of remote assigning of the remote (individual for given remote);
 UP – removing of the edited remote.
If we want to return to the main menu or to operating mode we must press and hold accordingly one or two times OK/ESC
button.
5.1.2. Owned remote edition
To conduct owned remote edition it is necessary to (Fig.9):
 with the display showing ‘PP’ PRESS OK/ESC button of the receiver; the display shows ‘PP-3’:
 3 times press the button of the remote to be edited until ‘PP-0’ is shown;
 press OK/ESC button to confirm, remote reference number is shown;

press OK/ESC button of the receiver to confirm;
At this time we are in sub options of PP function (see pt. 5.1.4-5.1.6).
Fig. 9 Programming/declaring owned remote to edit with the use of PP function in the main menu of the receiver.