DTM System cloud FLEX, Installation And Service Manual

Page: 38 / 40

38
8. Optional module of the wireless Wi-Fi WL2 card
8.1. General information
Radio WL2 card enables wireless managing of DTM System's device which is equipped with the special connector
to the card. The connection is held via the wireless Wi-Fi network which is made available by the user.
Remote control of the FLEX868 receiver is by the Internet application www.cloudflex.dtm.pl .
Thanks to this application the operation of the receiver is much simpler and more comfortable than in case of the
traditional management. The application allows to assign/edit/remove remotes, configure the receiver, create the copy of
data, look through the register of events or carry out reports and a lot of other activities and everything from the any place
in the world through the Internet. Additionally activating of the channels can take place from the application level on
mobile devices.
To learn all the details and information concerning the WL2 card read the manual of installation and service of
the WL card (available on: www.dtm.pl)
8.2. Technical and usage data

Frequency: 2.400 to 2.483 GHz;
 Modulation: 802.11b/g/n;
 Wireless security: WEP, WPA-PSK (TKIP),WPA2-PSK (AES);
 Power consumption 700mW;
 Cooperation with DTM System devices equipped with cards connector;
 Possibility of easy configuration of Wi-Fi connection – WPS, SMART CONFIG, HOT SPOT functions;
 Card Power supply by connector;
 Operational temperature from -20°C to +55°C;
 card size [mm]: 68x26x6;
9. Optional SHRF433 module
9.1. General information
The SHR-F433 module (Fig. 38) is an additional radio module that allows the receiver to work with the
DTM433MHz series remotes. The module should be plugged into the socket of EXT additional modules.
The use of the DTM433MHz series remote control is signaled, next to the remote control number, by a dot on
the right side of the display. For remote assigning of DTM433MHz series remotes, it is necessary to have a
previously assigned DTM433MHz series remote control.
9.2. Technical and operational data:
 Frequency 433.92MHz

Working temperature from -20°C to +55°C
 Overall dimensions [mm]: 22x19x4
Fig. 37 View of WL2 card .
Fig. 38 View of SHR-F433
optional module.