DTM System cloud FLEX, Installation And Service Manual

Page: 13 / 40

13
5.1.5. Pn option – assigning of the receiver channels to the remote buttons
To change assigned channels to the buttons of the remote it is necessary to (Fig. 12):
 when in remote edition mode (PP) with NEXT button set Pn and press OK/ESC button – the number of the
button to assign with the receiver channels is shown;
 when the display shows 'Pn.1', with NEXT button set the number of remote button (depending on the remote
type the available number of buttons is different) and confirm with OK/ESC button;
 the receiver alternately shows the number of the receiver and the number given to assign with the channels of
the receiver – confirm by pressing OK/ESC button
 the display shows 'Cn.Cx', where 'x' is a number of channel which is assigned with declared button, if declared
button has to control the chosen channel with NEXT button we set “C” in front of the channel number ('Cn.Cx'), if
the channel is not to be switched on we must set "_" ('Cn._x'); the changes are done with NEXT button by
pressing it longer;
 to accept it is necessary to press OK/ESC button shortly; the receiver returns to show the number of button 'Pn.',
it is possible to change the number of edited button with the NEXT button and continue assigning the channels
for further buttons or return to menu of PP sub option by pressing and holding OK/ESC button.
Fig. 12 Arranging the buttons of the remote to the channels of the receiver, Pn function in PP submenu of the
receiver.