DTM System cloud FLEX, Installation And Service Manual

Page: 5 / 40

5
2. Technical parameters
 power supply: 12…24V AC/DC ±10%;

power consumption 50mA;
 operational temperature: -20°C do +55°C;
 memory capacity: 9 999 remotes, each with individual number;
 event memory capacity: 50 000 positions;
 manual control output to release receiver channels: programmed type (NO/NC), time of output breach (0...9s),
possibility to assign any combination of outputs;

relay outputs on the base board of the receiver (type / quantity / maximum load): NO or NC / 2 / 1A 24V AC or DC;
 optional 2 additional outputs – REL-2 or REL-2-PWR modules;
 optional Wi-Fi WL2 card module;
 optional SHR-F433 radio module enabling cooperation with DTM433MHz series remotes;
 outputs operational modes: monostable, bistable or pulse mode;
 output support time regulation in monostable mode: 0,1s to 6553,5s with 0,1s resolution;
 radio module: modern, digital, super heterodye with intelligent adaptation to external radio conditions ensuring
reliability, repeatability and optional sensitivity;
 radio transmission security: 104-bit IRS;
 modulation type / frequency: FSK/868MHz;
 aerial output impedance: 50Ω
 aerial: wire, clamps to connect external aerial, rod aerial on the casing optional;
 splash-proof (IP-54) plastic surface casing;

openings in the receiver board are suitable for installation in buffer power supply unit casings;
 receiver memory: on the support;

user interface: buttons and LED display;
 possibility to protect the access to the receiver menu with PIN code;

real time clock with battery support for events registration;
 fast assigning of the remote button to the channel of the receiver;

possibility to assign any remote button to any receiver channel;
 remote edition without its physical presence on the basis of its reference number;
 possibility to delete all memory;
 possibility to delete single remote;
 possibility to assign the remote without the access to receiver buttons: function of remote assigning of the
remote control (in the radio range of the receiver); possible blockade of Remote assigning function
 function of transmitting the number of assigned remotes;
 security against accidental start with the use of the remote: double click of the remote button function
 function of copying the setting for the programmed remote: from Any other remote configured earlier.