DTM System cloud FLEX, Installation And Service Manual, Page: 9 / 40

9
5. Programming –receiver menu
Programming of the receiver uses NEXT and OK/ESC buttons and
LED display (Fig.7). The button described on the receiver board as NEXT is
used to move between the functions and when held longer – move between
positions. OK/ESC button is used to enter the functions, accepting the values
and when held longer – exit the function and resign from changes.
Receiver programme menu (Fig.7), has a tree structure consisting of
main and second-rate options. The entry to the menu of the receiver takes
place through pressing the NEXT button in the operating mode. Next pressing
of the NEXT button causes the passage to next function. Pressing OK/ESC
button causes entering the given function
Alt A remote management through the Wi-fi WL2 card (Option) and web
application CloudFlex (see pt 8) is an alternative option of the programming of
the receiver
Main menu options (Fig.8):
 PP – programming of the remotes (adding, removing and copying of the remote,
changes of the channels assigned to the buttons, individual blockade of the
remote assigning of the remote);

PC – programming of the channels of the receiver (monostable/bistable/ pulse
mode, triple click, time of channel activation);

LP – the number of remotes currently assigned to the receiver;
 bd – receiver access blockade – PIN code;

bc – blockade of the remote assigning of the remotes;
 Sr – settings for manual control output;

Et – ethernet network settings;
 Id – displaying the receiver identification;

GA – Galactic function settings;
 HA – disable all schedules;

PF – restore factory settings.
Fig. 7 View of receiver interface.
Fig. 8
Receiver main menu.