DTM System cloud FLEX, Installation And Service Manual

Page: 20 / 40

20
5.4. bd option – main menu access blockade of the receiver (PIN code)
bd option is used to set the main menu access blockade of the receiver. After activating the blockade every
attempt to enter demands PIN code (Fig.19).
To switch on main menu access blockade of the receiver it is necessary to (Fig.20):
 from main menu with NEXT button choose bd option and press OK/ESC button of the receiver;

with NEXT button set the value of parameter on 'on' and press OK/ESC button of the receiver;
 first digit of the PIN code blinks on the display;

choose the value for the first digit of PIN code by pressing NEXT button
 press and hold NEXT button to edit next digit of PIN code;

set the rest of the digits in the same manner;
 after entering the code press OK/ESC button of the receiver;;
 'on' symbol starts to blink on the display;
 press OK/ESC button again to confirm PIN code;

set identical PIN code again and accept with OK/ESC button;
 when the display shows 'on.A3', press OK/ESC button three times to accept the blockade with PIN number.
To switch off the blockade it is necessary to (Fig.21):
 from main menu with NEXT button choose bd option and press OK/ESC button of the receiver;
 with NEXT button set the value of parameter on 'of' and press OK/ESC button of the receiver;
 when the display shows 'bc.A3', press OK/ESC button three times
By pressing and holding OK/ESC button of the receiver it is possible to return to the menu.
THE LOSS OF PIN CODE PERMANENTLY BLOCKS THE ACCESS TO THE MENU OF THE PROGRAMMENU.
TO REMOVE THE ACCESS BLOCKADE REQUIRES THE INTERFERENCE IN EEPROM BY THE PRODUCER.
It is possible to remove the blockade from the level of CloudFlex application (see pt.8)
Fig. 19 Entering the main menu of the receiver secured with PIN code.