Description of Controls
Page 99 of 188
057-254 ISSUE: 2
4.2.6.1
ECU ALARMS (CAN FAULT CODES / DTC)
NOTE: For details on these code/graphic meanings, refer to the ECU instructions
provided by the engine manufacturer, or contact the engine manufacturer for further
assistance.
NOTE: For further details on connection to electronic engines, refer to DSE Publication:
057-004 Electronic Engines And DSE Wiring
When connected to a suitable CAN engine, the controller displays alarm status messages from the
ECU in the Alarms section of the display.
1/1
Alarms
ECU Amber
Warning
Press the Next Page
button to access the list of Current Engine DTCs (Diagnostic Trouble
Codes) from the ECU which are DM1 messages.
1/2
ECU Current DTCs
The DM1 DTC is interpreted by the module and is shown on the
module’s display as a text message. In addition to this, the
manufacturer’s DTC is shown below.
Water Level Low
SPN=131166 , FMI=8, OC=127
Type of alarm that is
triggered on the DSE
module, e.g. Warning
Summary of Contents for 8610 MKII
