DSE 8610 MKII, Operator'S Manual

Page: 22 / 188

Specification
057-254 ISSUE: 2 Page 22 of 188
2.8 OUTPUTS
2.8.1 DC OUTPUTS A & B (FUEL & START)
Description Specification
Type
Normally used as Fuel & Start outputs.
Fully configurable for other purposes if the module is configured to control an
electronic engine.
Rating 15 A resistive at Emergency Stop supply.
2.8.2 CONFIGURABLE VOLT-FREE RELAY OUTPUTS C & D
Description Specification
Type
Normally used for load switching control
Fully configurable volt-free relays.
Output C normally closed and Output D normal open.
Rating 8 A resistive at 250 V AC
2.8.3 CONFIGURABLE DC OUTPUTS E, F, G, H, I, J, K & L
Description Specification
Type Fully configurable, supplied from DC supply terminal 2.
Rating 2 A resistive at module supply.
2.8.4 GOVERNOR CONTROL OUTPUT
Description Specification
Arrangement Supplied from DC supply terminal 2
Type Isolated DC output, voltage controlled
Voltage Range -5 V to +10 V DC
Max Common Mode Voltage ±1 kV
Resolution Less than 1 mV
Accuracy ±1%
Minimum Load 500
Ω
2.8.5 AVR CONTROL OUTPUT
Description Specification
Arrangement Supplied from DC supply terminal 2
Type Isolated DC output, voltage controlled
Voltage Range -5 V to +10 V DC
Max Common Mode Voltage ±3 kV
Resolution Less than 1 mV
Accuracy ±1 %
Minimum Load 500 Ω