DSE 8610 MKII, Operator'S Manual

Page: 50 / 188

Installation
057-254 ISSUE: 2 Page 50 of 188
3.2.3 MPU, ECU, MSC & DSENET
®
NOTE: For further details of module configuration, refer to DSE Publication: 057-238
DSE8610 MKII Configuration Suite PC Software Manual.
NOTE: For further details on connection to electronic engines, refer to DSE Publication:
057-004 Electronic Engines And DSE Wiring
NOTE: Screened 120
Ω
Ω Ω
Ω
impedance cable specified for use with CAN must be used for the
CAN & MSC links.
DSE stock and supply Belden cable 9841 which is a high quality 120
Ω Ω Ω Ω
impedance cable
suitable for CAN use (DSE part number 016-030)
NOTE: As a termination resistor is internally fitted to the controller, the controller must be
the ‘first’ unit on the DSENet
®
link. A termination resistor MUST be fitted to the ‘last’ unit on
the DSENet
®
link. For connection details, refer to section entitled Typical Wiring Diagram
elsewhere in this document.
Pin
No
Description
Cable
Size
Notes
23 Magnetic Pickup Positive
0.5 mm²
AWG 20
Connect To Magnetic Pickup Device
24 Magnetic Pickup Negative
0.5 mm²
AWG 20
Connect To Magnetic Pickup Device
25 Magnetic Pickup Screen Shield Connect To Ground At One End Only
ECU
26 ECU Port H
0.5 mm²
AWG 20
Use only 120
Ω
CAN or RS485 approved cable
27 ECU Port L
0.5 mm²
AWG 20
Use only 120
Ω
CAN or RS485 approved cable
28 ECU Port Screen Shield Use only 120
Ω
CAN or RS485 approved cable
29
DSENet
®
Expansion B
0.5 mm²
AWG 20
Use only 120
Ω
CAN or RS485 approved cable
30
DSENet
®
Expansion A
0.5 mm²
AWG 20
Use only 120
Ω
CAN or RS485 approved cable
31
DSENet
®
Expansion Screen
Shield Use only 120
Ω
CAN or RS485 approved cable
MSC
32 MSC Port H
0.5 mm²
AWG 20
Use only 120
Ω
CAN or RS485 approved cable
33 MSC Port L
0.5 mm²
AWG 20
Use only 120
Ω
CAN or RS485 approved cable
34 MSC Port Screen Shield Use only 120
Ω
CAN or RS485 approved cable
GOV
35 Analogue Governor Output B
0.5mm²
AWG 20
Analogue Governor DC Output
36 Analogue Governor Output A
0.5mm²
AWG 20
Analogue Governor Output Reference
DO NOT CONNECT DO NOT CONNECT
AVR
38 Analogue AVR Output B
0.5mm²
AWG 20
Analogue AVR DC Output
39 Analogue AVR Output A
0.5mm²
AWG 20
Analogue AVR Output Reference