DSE 8610 MKII, Operator'S Manual

Page: 120 / 188

Operation
057-254 ISSUE: 2 Page 120 of 188
5.6 MSC COMPATIBILITY MODE
NOTE: These settings enable the interface between the DSE86xx MKII controllers and the
legacy DSE55xx and DSE75xx controllers.
Parameter Description
MSC Compatibility
NOTE: The DSE5560 and DSE7560 are not compatible
with the DSE8660 MKII, only one type of DSExx60 can be
connected on the MSC at any time (DSE5560/DSE7560 OR
DSE8660 MKII).
= The DSE86xx MKII is not be able to communicate with the
DSE55xx and DSE75xx series modules on the MSC Link.
= Communication between DSE86xx MKII and
DSE55xx/DSE75xx is enabled. The maximum number of
DSExx10 controllers is reduced to 16 and the maximum number
of DSExx60 controllers is reduced to 8.
P123 Ramp Enabled
NOTE: The P123 is only available for DSExx10 MKII
modules.
= The DSE8610 MKII uses MSC link for connection to other
DSE modules for ramping and load sharing.
= The DSE8610 MKII is connected to a DSE123 using the
MSC link to convert the MSC link to interface with Analogue
Load Share lines
P123 Frequency Trip (Only Available when P123 Ramp option is enabled)
If the frequency changes by this amount when ramping down,
the module opens the generator breaker.
MSC Link compatibility with
DSE55xx/DSE75xx modules