Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
7.3.2 Connecting the Remote Controller
When you connect the remote controller to your mobile device using a USB cable, you may
see a prompt to pick which app should be opened when this USB accessory is connected. If
you do see this prompt, select this app, and the status at the bottom of the main screen will
change to either: "Connect to drone: Failure (Disconnected from drone)" if the drone is not
on, or "Connect to drone: Success" if the drone is on.
If you do not see this pop-up and another app automatically opens, that app may have
been selected as the default app to open. Go to your Android device’s Settings, Apps, and
click on that app. Next, to the Open by default setting for that app, and clear defaults.
Now, reconnect the controller, and you should see the prompt.
7.4 Settings
Figure 46: App Settings
Pressing the “SETTINGS” button from the main menu will open a screen where the app’s
settings can be changed, shown in Figure 46. The following is a description of each setting:
Use Tablet Location
If this is enabled, the app will utilize the tablet’s location capabilities
to display the user’s location on the map, in addition to the GPS in the lightbridge
controller (if any). Location must also be enabled on the tablet for this to work.
However, locating the device will consume a significant amount of the tablet’s battery
power.
Last Updated March 12, 2020
Page 64
