Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
Figure 30: Creating a geofence for Ignis in the Ignis app.
Touch the ignition sphere icon in the top right corner of the flight screen to open the
Ignis controls , then touch the Geofence icon (the boxed drone icon) to open the Geofence
controls (see Figure 30). Touch the map to mark the corners of the burn area in a clockwise
or counter-clockwise order. You can also undo, redo, or clear the geofence.
Once you’ve finished creating the geofence, touch the ignition sphere icon in the top right
corner to close the Ignis controls.
4.1.25 Fill Hopper
Fill Hopper
:
Filled
Note: Use the app “AGITATE” button when filling to ensure chutes are filled
Figure 31: Left: Filling the Hopper with ignition spheres. Right: Approximate capacities.
Fill the Hopper with the desired number of ignition spheres as shown in Figure 31. Filling
the Hopper to the bottom of the aluminum brackets is approximately 400 ignition spheres. It
Last Updated March 12, 2020
Page 42
