Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
Figure 27: The status LED with multi-function button is located below the reservoir.
This will run both pumps forward for approximately 3 seconds to draw fluid from the
reservoir towards the needles. This process may need to be repeated several times until
antifreeze has reached both needles.
4.1.19 Dropper Needle
Dropper Needle
:
A and B Clear and Installed
Before each flight the needle should be removed and it should be verified that it is clear
of any foreign material and that it is sharp.
This process is identical for the Dropper A needle and the Dropper B needle.
To remove the needle assembly, push in on the black knob labeled “IGNIS” on the needle
assembly, twist it counter-clockwise until it stops, and pull it out.
Figure 28: Location to insert the needle.
Last Updated March 12, 2020
Page 39
