Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
Figure 86: Touch a waypoint to select it and make the delete bubble appear above it. Touch
the delete bubble to delete that waypoint. Touch anywhere else to deselect it.
Touch the “Clear” button to remove all of the waypoints. The “Undo” and “Redo” buttons
can be used to undo and redo adding, deleting, and clearing waypoints. If the drone is flying
along a waypoint mission, then the “Stop” button will stop the mission and give you manual
control of the drone again. You can also regain manual control of the drone by switching to
mode P on the controller.
Figure 87: Side view of waypoint mission.
Touch the “Side View” button to see a side view of the waypoint mission, as shown in
Figure 87. This side view shows the elevation of the terrain below the waypoint mission,
Last Updated March 12, 2020
Page 106
