Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
8.3.2 Cleaning Dropper
Figure 112: Cleaning kit.
We provide a cleaning kit to clean the dropper that includes a brush, cotton swabs and dry
lubricant. The frequency at which the dropper should be cleaned will vary greatly based on
the operational conditions. We recommend cleaning at the end of each operational day to
maintain proper working order.
Apply a small amount of the dry lubricant to the brush and cotton swabs to clean the
Dropper wherever dirty, paying special attention to the bearings on the slipper block and
tracks they run on. Additionally, clean the oval cutout on top of the dropper where the
Hopper and Dropper mate shown in Figure 113.
Figure 113: Clean the oval cutout where the Hopper and Dropper mate.
Build up of antifreeze or ash here could cause the Dropper to stick to the Hopper and
Last Updated March 12, 2020
Page 127
