Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
Figure 124: Three connectors installed.
Next, plug in the three cables as shown in Figure 124. Make sure that the black wires
on the connectors are all on the left. The yellow and green cables should be installed on the
lower row of connectors labeled sBus (green on right, yellow on left). The blue cable should
attach to the connector labeled API, with the white wire on the pin all the way right (note
the 4th pin on the right if the header is unused). Incorrect connections could cause damage
to the Matrice or Ignis.
Figure 125: Attach USB port to upper rail under battery bay 6.
Clamp the USB port attachment to the upper rail under battery bay 6 by unscrewing
the four screws holding the tube clamps together, sliding the usb attachment into the proper
place, and then screwing the tube clamps back together.
Last Updated March 12, 2020
Page 134
