DResearch GmbH – Configuration of the Hydra
IP
analogue DVR
2011-02-02
25
3.7
Error management
Parameter
Error management
Output possibilities for system errors and events are the LED-Block (not freely configurable), a digital
output (GPO) that can be configured as group alarm signal, the video output with monitor, as well as the
IBIS-vehicle bus, providing the system is connected to the IBIS-system of the vehicle.
Event Error
Description of the error i.e. event. Only these are signalled over the error output. This field
is not editable.
Group alarm signal
Here you can set if the event or error is issued over the group alarm signal.
Display on OSD
Here you can set if the error/event is shown on the preview monitor per OSD. Errors are
blended in as icons and text messages.
Send IBIS error
message
Setting for error messages that are sent to the IBIS-control device of the vehicle. The
reply messages (120, 130, and 170) are in accordance with the IBIS standard VDV300.
The choices depend on the IBIS-Client type, that has been configured for the DVR under
“Communications”