DResearch GmbH – Configuration of the Hydra
IP
analogue DVR
2011-02-02
12
2.2
System configuration through online method
NOTE:
Please note that the online configuration function will not be available until April 2011. Until then, all
systems will have to be configured with the offline configuration method.
To load, edit or save a system configuration, there has to be a TCP/IP connection established
between the configuration PC and the system.
Direct cable connection between the system and PC
Use a CAT5 patch cable with a RJ45 connector and a M12 connector
Connect the PC to the system
Connection over Wi-Fi or mobile radio
There has to be a wireless TCP/IP connection between the System and PC. The system
has to be equipped with broadcast functionality (Wi-Fi/3G)
Should the system not be accessible, there are several possible causes for this:
The vehicle and its system are in an area with no coverage
Misconfiguration of the system
SIM card is blocked
Network congestion or other problems with the provider, or within the Wi-Fi range
To connect to the system, use one of the supported web browsers and enter the IP-Address of the
system. After establishing a successful connection, the configuration set will load into the browser and
can be edited and saved. The system will reboot after saving. A new connection is only possible after
a successful reboot.
You can start the system configuration over the graphic user interface of the Fleet Management
System (FMS). There is a detailed description in the user manual of the FMS.
