DResearch GmbH – Configuration of the Hydra
IP
analogue DVR
2011-02-02
23
3.5
GPIO Settings
Parameter
GPIO-Settings – GPI Trigger
The general purpose inputs (GPI) are configurable as opener and closer. You should clarify which trigger
signal (low, high, level, impulse) is a switch signal and which trigger (button, switch, opener and closer)
is used.
ID
The physical ID of the GPI. This field is not editable.
Label
The label of the GPI can be freely defined. The labels are identical with the ID per
default.
NC - NO
Determines if the GPI should be configured as an opener (normally Open NO) or as a
closer (normally closed NC).
Parameter
GPIO-Settings – GPO Relay
The general purpose outputs (GPO) are configurable as switch relays for external devices or as group
alarm signals for the output of switch signals, in case of an error. The signalled errors and/or events are
defined in the “Error management” tab.
Label
The physical ID of the GPI. This field is not editable.
Use
Currently only the output of group alarms signal for system errors and events is
supported
Definition of digital inputs (GPI,
Trigger).
Slave
GPO
is
also
available for Master/Slave systems
Definition of digital outputs (switch
relay GPO). Slave GPO is currently
not configurable.
