DResearch GmbH – Configuration of the Hydra
IP
analogue DVR
2011-02-02
11
Group
Description
1
Tabs for „DVR Overview“and interface for the selected configuration set. All DVRs that have
already been configured with the USB-configuration flash drive are listed in the overview
(Download or Upload of a configuration set to or from the DVR). After selection of a DVR
configuration and the action to be taken (duplicate, edit, release or delete), a view of the selected
configuration set opens automatically
2
Button for creation of a fleet configuration
Following the selection of a configuration set (as
starting basis), a special set named globalConfig is created.
3
Button for duplicating, editing, releasing and deleting single configuration sets and/or an entire
entry.
4
Label and serial number of a DVR with an existing configuration set. In the view above are
default configurations of different DVRs that can be used as a basis for the creation of new
configurations. If there aren’t any device names assigned in the configuration of the DVR, the
serial number is shown as label.
5
Configuration set ORIGINAL – this stems from the DVR and was saved to the configuration flash
drive with download. The green icon signals the presence of the set, the red icon shows that
there hasn’t been any set of this type generated for this for entry
6
Configuration set EDITING – this must be explicitly generated from an existing set. This is the
version to be edited and can be edited at will. After edit is completed, the set RELEASE is
generated from this set, which is loaded
to the DVR.
7
Configuration set RELEASE – this has to be explicitly created and is the configuration that is
saved to the DVR after editing (Upload).
8
Date and time of modification for every configuration set (Original, Editing and Release) is saved
in these three columns.
9
These two columns are used for orientation. You can identify which DVR the configuration stems
from and on what device it was later transferred to.
1
2
3
5
6
7
8
9
4
