DResearch GmbH – Configuration of the Hydra
IP
analogue DVR
2011-02-02
21
3.4
Video output
Parameter
Video out - Controlling the display on a monitor
Standard output
Selecting the standard output, that is enabled after system start:
No VideoOut defined: there should occur no video output
Automatic sequence: the DVR should automatically enable a specific switching
sequence of cameras and/or MultiView. Frequency, Schemes and Layout can be defined
freely in the previous section. Additionally, manual sequencing can be defined.
Manual shift: automatic sequencing is disabled, specific cameras or layouts (MultiView)
are shown. A GPI has to be chosen for control, which has a trigger connected to it.
Fix output: a specific image is to be shown (camera or black screen). Additionally,
manual sequencing can be defined.
Schemes for
sequencing
Selecting the scheme for sequencing (bottom right). Prior to that, a scheme for
sequencing has to be created. Therein you can define camera and MultiView.
Frequency
Once the time expires (in seconds), a switch to the next camera i.e. MultiView occurs.
Manual shift
Once this field is enabled, an automatic switching sequence through a trigger signal can
be interrupted, in order to switch to other cameras/MultiViews.
Basic video output controls. The settings vary
depending on the selected standard output and
the activation of the relaying options.
Definition of layouts for the display
at the monitor (MultiViews)
Scheme definitions for automatic
image sequencing.
It is possible to define multiple
sequences here.
Control definition through digital
inputs
(Trigger).
The
assigned
priority is of utmost importance for
system behaviour.
