Draytek Vigor3910 Series User Manual Download Page 101

Page: 101 / 627

Vigor3910 Series User’s Guide

Available settings are explained as follows:

Item Description

Enable

Check to enable this entry.

Service

Choose the predefined service to apply for such trigger
profile.

Comment

Type the text to memorize the application of this rule.

Source IP

Select any IP address, IP object or IP group as the source IP.

Triggering Protocol

Select the protocol (TCP, UDP or TCP/UDP) for such

triggering profile.

Triggering Port

Type the port or port range for such triggering profile.

Incoming Protocol

When the triggering packets received, it is expected the
incoming packets will use the selected protocol. Select the

protocol (TCP, UDP or TCP/UDP) for the incoming data of
such triggering profile.

Incoming Port

Type the port or port range for the incoming packets.

After finishing all the settings here, please click OK to save the configuration.

Summary of Contents for Vigor3910 Series




















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vigor3910 Series

Reviews:

Related manuals for Vigor3910 Series

Brands by name

Popular brands

Draytek Vigor3910 Series, User Manual

Search results

Summary of Contents for Vigor3910 Series

Reviews:

Related manuals for Vigor3910 Series

Brands by name

Popular brands