manualshive.com logo in svg

Draytek Vigor3910 Series, User Manual

Share
Download
Draytek Vigor3910 Series User Manual Download Page 112

 

Vigor3910 Series User’s Guide 

102 

maps with one IP address. If required, you can configure two 
IP addresses mapping with the same domain name.

 

Add – Click it to open a dialog to type the host’s IP address. 

 

 

Only responds to the DNS…. – Different LAN PCs can 
share the same domain name. However, you have to 

check this box to make the router identify & respond 
the IP address for the DNS query coming from different 

LAN PC. 

Delete – Click it to remove an existed IP address on the list. 

3.

 

Click OK button to save the settings. 

4.

 

If you need to configure LAN DNS settings, click index 1 to edit the LAN DNS profile just 

created. Or, you can click index 2 to use this profile as conditional DNS forwarding. 

 

Available settings are explained as follows: 

Item Description 

Enable 

Check this box to enable such profile. 

Profile 

Type a name for such profile. 
Note: If you type a name here for conditional DNS forwarding 

and click OK to save the configuration, the name also will be 
applied to LAN DNS automatically.   

Domain Name 

Type the domain name for such profile. 

DNS Server IP Address  Type the IP address of the DNS server you want to use for DNS 

forwarding. 

5.

 

Click OK button to save the settings. 

6.

 

A new LAN DNS profile has been created.     

Summary of Contents for Vigor3910 Series




















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands