Doosan DL200, Operation And Maintenance Manual

Page: 29 / 256

OP000506
1-17
Safety
Mounting and Dismounting
Before getting on or off the machine, if there is any oil.
grease, or mud on the handrails, steps, or track shoes, wipe
it off immediately. Always keep these parts clean. Repair
any damage and tighten any loose bolts.
Never jump on or off the machine. In particular, never get
on or off a moving machine. These actions may lead to
serious injury.
When getting on or off the machine, always face the
machine, and maintain a three-point contact (both feet and
one hand or one foot and both hands) with the handholds
and steps to ensure that you support yourself securely.
Never hold any control levers when getting on or off the
machine.
Never get up from operator's seat or leave operator's station
and dismount machine if engine is running.
Fuel, Oil and Hydraulic Fluid Fire
Hazards
Fuel, oil and antifreeze will catch fire if it is brought close to
a flame. Fuel is particularly flammable and can be
hazardous.
Always strictly observe the following.
Add fuel, oil, antifreeze and hydraulic fluid to the machine
only in a well ventilated area. The machine must be parked
with controls, lights and switches turned "OFF." The engine
must be "OFF" and any flames, glowing embers, auxiliary
heating units or spark causing equipment must be doused,
turned "OFF" and/or kept well clear of the machine.
Static electricity can produce dangerous sparks at the fuel
filling nozzle. In very cold, dry weather or other conditions
that could produce a static discharge, keep the tip of the
fuel nozzle in constant contact with the neck of the fuel
filling nozzle, to provide a ground.
Keep fuel and other fluid reservoir caps tight and do not
start the engine until caps have been secured.
Figure 4
HA3O1003
Figure 5