OP000508
Operation
3-8
Starting with Auxiliary Batteries
If batteries are drained during starting procedures, you can
jump start engine using auxiliary or booster batteries
according to following procedures:
1.
Connect positive jumper cable from auxiliary batteries
to depleted batteries (Figure 18).
2.
Connect negative jumper cable from auxiliary batteries
to a ground point on machine frame. DO NOT
CONNECT DIRECTLY TO NEGATIVE BATTERY
TERMINAL.
3.
Follow normal engine starting procedures.
4.
After engine has started, remove negative jumper
cable, and then positive cable.
WARNING!
Wear safety glasses.
Never connect negative leads to positive terminals and
vice versa.
DO NOT connect auxiliary or booster battery ground
terminal directly to battery terminal. Locate and use a
ground point on machine frame.
Depleted batteries generate hydrogen gas. Electrical
sparks around or near batteries can cause an explosion.
Figure 18
Reference
Number
Description
1
Auxiliary Batteries
2
Depleted Batteries
3
Ground Auxiliary Batteries to
Machine Frame
Reference
Number
Description
Summary of Contents for DL200
