Doosan DL200, Operation And Maintenance Manual

Page: 121 / 256

OP000507
2-61
Operating Controls
Fusible Link
A fusible link (Figure 117) is in the battery box.
If the engine does not crank, first check that the starter
switch is turned "ON" and that no power is available (No
indicator lights will light.). Check that the "A" portion (Figure
118) of the fusible link is not broken or burned through.
Replace the fusible link if damage and investigate cause.
Engine Emergency Stop Switch
If the engine does not shut down when using the starter
switch, it can be stopped by moving the engine emergency
stop switch to the "I" (Emergency Stop) position.
O. In this position, the engine emergency stop system is
"OFF"
I. In this position, "Emergency Stop" is selected the
engine will shut down
NOTE:
When released, the switch will return to "O"
(OFF) position
FG003978
Figure 117
HAOB100L
A
Figure 118
WARNING!
When changing the fusible link, replace the fusible link
with the same capacity part. Otherwise, a fire could
break out in the wiring harness and/or other
components of the circuit. Always use original
DOOSAN
parts.
FG004340
Figure 119
FG004341
Figure 120