Doosan DL200, Operation And Maintenance Manual

Page: 95 / 256

OP000507
2-35
Operating Controls
11. Pilot Cutoff Switch
O. In this position the operator cannot operate the
pilot control valve lever (joystick).
I. In this position the operator can fully control the
movement of the pilot control valve lever
(joystick).
12. Parking Brake switch
O. In this position, the parking brake is "RELEASED"
and the indicator light on the front instrument
panel turns "OFF."
I. In this position, the parking brake is "APPLIED"
and the indicator light on the front instrument
panel comes "ON." This brake can also be used
as an emergency brake.
Figure 67
HBOI110L
O
I
CAUTION!
When driving or parking, the pilot cutoff switch
must be changed to "O" (OFF) position.
Figure 68
HA0O2019
P
O
I
WARNING!
Set the parking brake switch in the "I" (APPLIED)
position before leaving the loader. Make sure to
"APPLY" the parking brake switch before trying to
start the loader.
10
0
5
20
30
25
15
40
30
50
20
0
10
FG006055
Figure 69
CAUTION!
Do not use the parking brake to stop the loader,
except in an emergency; otherwise, it might cause
premature wear or damage of the brake.