Dish Network VQ4510, User Manual

Page: 67 / 181

Receiver Customization
57
Operating Other Devices
3
For AUX Mode only. Press 0 for a second TV, 1 for a second DVD and/or VCR, or 2 for a
tuner, amplifier, or audio receiver. Press STAR(*). This step programs the type of device
that you want to program in AUX mode. If you are not programming in AUX mode, skip to
step 4.
4
Press POWER. Your remote is now in scan mode.
5
Press the UP or DOWN ARROW repeatedly until the device turns off. As you press the UP
or DOWN ARROW, the remote tries each code in the memory to see if it can turn off the
device. When the device turns off, you have found a code that might work.
Note : The mode button for the device flashes rapidly eight times when you have scanned
all the codes for that device.
6
Press POUND (#). The mode button flases three times if the code was entered correctly.
This stores the code you found.
7
Turn the device back on and try some other buttons to make sure they work. Sometimese
POWER works when other buttons do not. If using Limited Mode, try VOLUME or MUTE.
8
If necessary, repeat this procedure until you have tried all the codes. You may need to
repeat the scan to find the best code for your device.