Dish Network VQ4510, User Manual

Page: 65 / 181

Receiver Customization
55
Operating Other Devices
Turning Limited Mode On and Off
1
Press and hold the correct mode button (for example, TV) until all of the mode buttons
light. Release the mode button.
2
Press:
• PAGE UP to turn Limited Mode on.
• PAGE DOWN to turn Limited Mode off.
3
Press POUND (#).
Combination Devices
If you are programming the remote to operate a combination device, such as a TV/VCR or
a TV/DVD, program the remote control in one mode, and then repeat the procedure in the
other mode. For example, to program the remote to control a TV/VCR using code 748,
follow the instructions to program the remote to control the TV using code 748, and then
repeat the instructions for the VCR using the same code.
Programming Using Device Code Tables
Program the remote to control other devices using device codes.
1
Turn the device on, using the device’s front panel buttons or its remote control.
Press POUND (#)
Press and hold the
correct Mode button until
all Mode buttons light.
Release Mode button
Press PAGE UP to
turn Limited Mode on.
Press PAGE DOWN to
turn Limited Mode off
1
2
3-4
5-6
7
8
9-11
Turn
device on
Find code
in tables
Press & hold
Mode button
until all Mode
buttons light up
Test to make
sure code
works
Press
POWER
to see if device
turns off
Enter
code
from table
Press
POUND
DVD
DVD
DVD