Dish Network VQ4510 User Manual Download

Page: 127 / 181

Appendix

117

FCC Compliance

FCC C

OMPLIANCE

The following text is extracted from Federal Communications Commission (FCC) regulations, as of the publication date

of this

Guide

. Contact the FCC (see following) or your library for the complete text of the regulations.

Compliance Information Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Connecting to an Over-the-Air Antenna

In order to receive local broadcast channels, you may wish to install an over-the-air antenna into your TV distribution

equipment. There are many devices that allow you to connect your antenna to your in-home distribution system such as

splitters and amplifiers. You must be careful to meet certain FCC regulations with respect to the isolation between the

antenna port and the network port of your system. It is recommended that you purchase a splitter or amplifier with the

correctly specified isolation from your local satellite television retailer.

Summary of Contents for VQ4510






















































































































































































Search results

Summary of Contents for VQ4510

Reviews:

Related manuals for VQ4510

Brands by name

Popular brands

Dish Network VQ4510, User Manual

Search results

Summary of Contents for VQ4510

Reviews:

Related manuals for VQ4510

Brands by name

Popular brands