manualshive.com logo in svg

Dish Network VQ4510, User Manual

Share
Download
Dish Network VQ4510 User Manual Download Page 155

Page 20

 3. 

 

If the rubber feet have been installed,  
lay the unit on a soft, non-scratching surface  
and remove them from the bottom of the unit.   

DO NOT INSTALL UNIT WITH  
RUBBER FEET IN PLACE.

 4. 

 

Mount the antenna unit using the  
(4) mounting holes.  Make sure to  
seal mounting holes with roof  
compatible sealant.

 5. 

 

Connect one end of 50 foot coax cable to the MAIN port and tighten connection (see below). 

 

DO NOT OVER TIGHTEN

. 

 
If using a second receiver, connect end of second coax (sold separately) to the AUX port.  
Tighten connection.  

DO NOT OVER TIGHTEN.

NOTE:

  The installer is responsible for determining the most appropriate fasteners to secure the antenna unit to the 

roof.  Depending on the roof material, fasteners such as lag screws, well nuts, sheet metal screws, toggle bolts 
and T anchors may be used, and should always be used in combination with a roof compatible sealant.

,03257$177KHLQVWDOOHULVUHVSRQVLEOHIRUZHDWKHUSURR¿QJDOOKROHVZLWKVHDODQW

IMPORTANT!

For roof mounting, do not apply the rubber feet.  

If present, remove rubber feet.

MOUNTING WITH RUBBER FEET VOIDS WARRANTY.  

IMPORTANT!  

&RD[FRQQHFWLRQVVKRXOGEHVQXJ

DO NOT OVER TIGHTEN!

NOTE:

7KHUHDUHWZRFRD[SRUWVRQWKHEDFNRIWKHDQWHQQDXQLW7KHRQHODEHOHG³0$,1´

MUST

 be connected to the 

main receiver in vehicle.  This is the receiver that will control automatic satellite switching.  The one labeled 

³$8;´FDQEHXVHGIRUDQDGGLWLRQDOUHFHLYHULIGHVLUHG

Summary of Contents for VQ4510






















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands