Dinamica Generale AgriNIR, Operator'S Manual

Page: 6 / 68

General Information AgriNIR™ Analyzer Rev. A11
4
BEFORE USING
1.
For a correct functioning of the device, it will be necessary to put the AgriNIR™ on a
horizontal surface allowing the user to move easily the fodder box containing the
sample to analyze.
2.
The AgriNIR™ device must be supplied with a tension between 9,5 – 32 VDC
through the suitable connector put on the upper of the case. That can be done
through:
•
Power Supply (output at 12 VDC) provided with the device;
•
Supply cable (optional) with plug for car lighter supply.
In case other supply sources were used, is not responsible for
damages to people or the AgriNIR™ device.
3.
For a correct functioning verify:
•
In case of supplying through a 12 VDC supplier, that the cable for the supplier is
connected to a tension between 100-240 VAC;
•
In case of supplying through the plug for car lighter, that the battery has a tension
always higher then 9,5 Volts.
4.
During delivery of the AgriNIR™ it is important:
•
Not to put mobile and/or sharpened objects inside the case preventing the
electronic/optoelectronic (graphical display, printer, communication cable, optical
fiber protected by a black sheath put at the bottom of the case) device from
being broken or wrongly hurt.
•
To fasten the accessories (fodder box, accessories for the fodder box, power
supplier, supply cable, supply cable with plug for car lighter, clearing accessories)
to prevent them from moving inside the case or the electronic/optoelectronic
device from being broken.
If it is not the case, is not responsible for damages to the AgriNIR™.
5.
DO NOT POWER the AgriNIR™ device (by supply power cable for car lighter) during
transporting by car.
If it is not the case, is not responsible for damages to the AgriNIR™.
6.
Disconnect the supply cable from the device before servicing and/or clearing the
AgriNIR™.
If it is not the case, is not responsible for damages to people or to
the AgriNIR™.
7.
To clean the AgriNIR™ correctly:
•
for the upper part (display, keyboard, printer, reading glass) use a soft and
slightly wet cloth;
•
For the bottom (metal chassis of the fodder box and reading window of the Read
NIR) use pressurized air or a soft and slightly wet cloth.
DO NOT use neither alcohol nor other solvents!
DO NOT wet with water!
If it is not the case, is not responsible for damages to the AgriNIR™.
8.
For a correct functioning of the sampling fodder box, use a soft cloth or pressurized
air or flowing water. DO use neither alcohol nor other solvents!
If it is not the case, is not responsible for damages to the device.