Use AgriNIR™ Analyzer Rev. A11
E
NG
L
IS
H
31
6.7
Analysis Samples Identifying
Before starting the analysis on the forage sample, it’s possible to set the following identifiers.
If you press F-key
it’s possible to set :
SAMPLE ID
, it allows to mark the parti-cular
physical sample to analyze.
Press the cursor keys
or the F-keys
…
to change the
Sample ID value.
Press <ENTER>
to exit and save value.
Press <RESET>
to exit without saving.
SAMPLE ID
is the current sample identifier number : this ID number will be automatically proposed
before starting the analysis on the sample and it will be printed on the tickets at the end of
analysis execution.
LAST SAMPLE ID
is the previous sample identifier number used in the last analysis.
After every analysis the
SAMPLE ID
number
is automatically increased by 1.
If you press F-key
it’s possible to set :
CUSTOMER CODE
, it allows to give a
code number to the client who the analysis
sample belongs.
Press the cursor keys
or the F-keys
…
to change the
Customer Code value.
Press <ENTER>
to exit and save value.
Press <RESET>
to exit without saving.
CUSTOMER CODE
this number will be printed on the tickets at the end of analysis execution.
Summary of Contents for AgriNIR
