Dinamica Generale AgriNIR, Operator'S Manual

Page: 26 / 68

Use AgriNIR™ Analyzer Rev. A11
24
If you start the analysis execution during the
WARM-UP phase
, the AgriNIR™ system shows the
following message:

The status icon of the NIR system indicates
the
WARM-UP
phase.
At the end of the calibration this message
disappears and the AgriNIR™
begins
automatically the CALIBRATION phase and its
message (see the next picture below).
If you start the analysis execution during the
CALIBRATION phase
, the AgriNIR™ system shows the
following message :

The status icon of the NIR system indicates
the
CALIBRATION
phase.
At the end of the calibration this message
disappears and the AgriNIR™
begins
automatically the ANALYSIS EXECUTION of the
selected component.
During normal functioning, the AgriNIR™ machine executes automatically
the optical calibration phase :
•
every
5 minutes
;
•
just after every analysis execution.
For this reason it's possible :

the NIR status icon changes automatically to ;

to have the NIR calibration message during analysis execution.