Dinamica Generale AgriNIR, Operator'S Manual

Page: 27 / 68

Use AgriNIR™ Analyzer Rev. A11
E
NG
L
IS
H
25
6.5 Error Messaging of NIR analyzer internal system
After turning on the AgriNIR™, set the Customer Code to continue in the main screen, if appears (before
start the WARM-UP phase) :
TROUBLESHOOTING
1.
Please check if a data cable is connected to the PROG / DATA connector (please
see the picture at page 10). In this case the internal NIR system takes more time to
start the communication and to update NIR status icon and NIR temperature.
2.
Please check if the communication cable from Electronic Unit (front control panel) is
connected to the NIR group inside the bottom box.
3.
Please check if the communication cable from Electronic Unit to NIR group is not
damaged.
4.
If is not the case 1 or 2, please contact the Customer Service.
During functioning of the AgriNIR™ machine, if appears this following messages :

the AgriNIR™ machine cannot communicate
with its internal NIR analyzer.
NIR system is in
Error State
It’s NOT possible to detect the
temperature of the internal NIR
sensor