Dinamica Generale AgriNIR, Operator'S Manual

Page: 59 / 68

Service AgriNIR™ Analyzer Rev. A11
E
NG
L
IS
H
57
7 CLEANING THE DEVICE
It is important to clean thoroughly and periodically the AgriNIR™ system, especially the lower metal body
where the sample fodder box and the Read NIR module are positioned.
To clean the system correctly going on as follows:
•
disconnect the connector of the electric cable and loosen the securing knob of the NIR Group, as
shown in pict. 6A;
•
turn the securing bracket of the NIR Group by 90° anticlockwise, as shown in pict. 6B;
•
raise the NIR Group up as shown in pict. 6C;
•
clean with a soft lightly wet cloth the Read NIR reading head’s window and eliminate the residues
around (see pict. 6C);
•
clean with a soft wet cloth or even with pressurized air (a low pressure of 2/3 bar max) the fodder
box sliding site (see pict. 6C);
•
it is possible disconnect the fan filter and clean it with pressurized air (a low pressure of 2/3 bar
max) (see pict. 6D).
It would be better to follow this procedure after executing analysis on samples with a high water
percentage (for example, corn silage).