Communication solutions for power utilities
UNIVERSAL TELEPROTECTION TPU-1
INSTALLATION AND COMMISSIONING MANUAL Web version TPU-1R - Rev. 5.9 (May 2018)
30/69
4.5
GOOSE PROTECTION INTERFACE MODULE
The GOOSE protection interface module (IEPT) allows the TPU-1 terminal to communicate
with the protection terminals according to IEC 61850 standard.
Figure 25 shows a front view of the IEPT module. As can be seen in the figure, the module
has two ports type 10/100Base-Tx with RJ-45 connector (IEPT.01). The input and output of
the GOOSE messages is carried out through these ports. The two ports have the same IP
address.
Upon request, instead of the above, the module can be supplied with two optical ports type
100Base-Fx multimode (1300 nm) with ST connector (IEPT.00).
Make sure that the module is completely fixed to the chassis.
Figure 25 GOOSE protection interface module (IEPT) connectors
