DIMAT TPU-1 Installation And Comissioning Manual Download Page 40

Page: 40 / 69

Communication solutions for power utilities

UNIVERSAL TELEPROTECTION TPU-1
INSTALLATION AND COMMISSIONING MANUAL Web version TPU-1R - Rev. 5.9 (May 2018)

40/69

5.6

STARTING UP THE WEB SERVER

Having configured the web server and the management computer, open the

Microsoft Internet Explorer browser from the management computer.

Once the browser is open, make sure that:

The

Java

virtual machine is correctly configured.

In order to do so, from the

Tools

menu, access the option

Internet options

and press

on the

Advanced

tab. Next, in the

Settings

window, look for the

Java

virtual machine

of Sun Microsystems, that is to say,

Java (Sun

) and select the available option.

The cache memory of the browser has been deleted.

In order to do so, from the

Tools

menu, access the option

Internet options

and, in the

Temporary

Internet

files

section of the

General

tab, select

Delete all content

The cache memory of the

Java

virtual machine has been deleted.

In order to do so, open the Windows

Control panel

and access the

Java

option.

From the

Java Control panel

, access the

General

tab and, in the

Temporary Internet

files section

, press on the

Configuration

button and, in the new window that appears,

press on

Delete files

and disable the

Save temporary files in my Computer

option.

If the operating system installed is the Microsoft Windows

Service Pack 2

version

make sure that option

Allow active content to run in files on My computer

configured

In order to do so, from the

Tools

menu, access the option

Internet options

and

press

the

Advanced

tab. Next, in the

Settings

window, look for the

Allow

active

content

to run

in files on My computer

option in the

Security

section and select it.

Once previous operations have been carried out, in the ADDRESS field of the browser field

key the IP address of the web server of the TPU-1 terminal. The IP address in factory is the

172.16.6.3.

Figure 33 shows the page that appears when the IP address is entered correctly. It can be

seen that the system asks for a new password before allowing access.

Summary of Contents for TPU-1






































































Search results

Summary of Contents for TPU-1

Reviews:

Related manuals for TPU-1

Brands by name

Popular brands

DIMAT TPU-1, Installation And Comissioning Manual

Search results

Summary of Contents for TPU-1

Reviews:

Related manuals for TPU-1

Brands by name

Popular brands