Communication solutions for power utilities
UNIVERSAL TELEPROTECTION TPU-1
INSTALLATION AND COMMISSIONING MANUAL Web version TPU-1R - Rev. 5.9 (May 2018)
39/69
Figure 32 shows the most important input and output optical power characteristics according
to the type of multi-mode fiber used.
Figure 32 Multi-mode optical fiber
5.5.3
Configuration
If Web Management is to be carried out from the LAN interface, the steps to be followed
are:
1.
If the network module is not installed in the management computer, it should be
installed according to the LAN interface one wishes to use in the TPU-1 terminal.
2.
Open the network option of the Windows
Control Panel
.
3.
Select the properties of the TCP/IP protocol of the network module installed in the
management computer.
4.
Enter the network parameters (IP address, subnet mask and default gateway)
compatible with those of the TPU-1 terminal.
If the Web Management is performed from an IP network and it is necessary to use
networking devices such as hubs, switches, routers, etc. it is assumed that the user has
such elements and is capable of configuring them to integrate the TPU-1 terminal in their
work group.
